Control Identification Notes

Where a control has a secondary function, you’ll see it written as first/second. This means that first is the primary function, second is the secondary function.

Orientation

Place the module in your rack so that there are a line of ports on the left, right, and bottom. The large dial should be at the top of the module.

Layout Overview

The panel has five rows of controls plus a bottom jack row. The left edge has audio I/O jacks. The right edge has CV jacks. The center contains all main processing controls organized into labeled sections.

Left Edge – Audio I/O Jacks (Vertical Column, Top to Bottom)

• LEFT IN
• RIGHT IN
• LEFT OUT
• RIGHT OUT
• IN GATE
• FAVORITE

Right Edge – CV Jacks (Vertical Column, Top to Bottom)

• SIZE / PITCH
• WET
• DECAY
• CLEAR
• FEEDBACK
• ECHO ON
• TAP / TRIG

Row 1 (Top Row, Left to Right)

• DRY (knob)
• INFINITE/Pitch Quantize (Button)
• SIZE / PITCH (large knob, center) Note: contrary to the prior note, the / here does not denote an alternative function.
• FAVORITE/SAVE (button)
• WET (knob)

Row 2 – HARMONICS Section (Left of Center) and DELAY/KARPLUS Section (Right of Center)

A dotted border labels the left box “HARMONICS” and the right box “DELAY/KARPLUS”.

HARMONICS box (left to right within box)

• INPUT GAIN (knob)
• TEXTURE (toggle switch) – Three-position toggle; sparse, dense, diffuse.
• SHIMMER/REGEN (knob)
• GLIMMER/HIGH BAND (knob)

DELAY/KARPLUS box (left to right within box)

• FEEDBACK/ECHO ON (knob)
• DELAY and TUNE/TAP and TRIG (knob)
• LFO TARGET (toggle switch) (delay, pitch, filter)

DECAY knob (right of boxes)

• DECAY (knob)

Row 3 – FILTER Section (Left) and LFO Section (Right)

A dotted border labels the left box “FILTER” and the right area “LFO”.

FILTER box (left to right)

• LOW PASS (KNOB)
• LOW DAMP (knob)
• HIGH DAMP (knob)

LFO section (left to right)

• Waveform
• SPEED (knob)
• SHAPE (knob)
• DEPTH (knob)

Bottom Jack Row (Left to Right)

• FAVORITE
• SHIMMER
• INTERVAL
• HIGH DAMP
• GLIMMER
• LFO CLK IN
• SPEED
• DEPTH
• EXT LFO IN
• TAP / TRIG

Notes for Navigation

• SIZE/PITCH is the largest knob and is located top-center – easiest to find by touch.
• The left edge column is all audio I/O; the right edge column is all CV jacks.
• The HARMONICS and DELAY/KARPLUS sections are side by side in row 2, each in a dotted box.
• The FILTER and LFO sections are side by side in row 3, each in their own area.
• The bottom jack row provides CV access to most parameters; count from left to locate a specific jack.