Orientation

Orient the module so that the large central TUNE knob (with two small toggle switches flanking it) is at the top, and the two horizontal rows of jacks are at the bottom.

Layout Overview

The panel is symmetrical left-to-right. A single large TUNE knob dominates the top center, with a small toggle switch on each side of it. Below the TUNE knob there are two rows of two large knobs each (one on the left, one on the right of the panel). The bottom of the panel has two rows of five jacks each — the upper row is CV/audio inputs, the lower row is waveform outputs.

Top Section — Tune and Mode Switches

At the top of the panel:

• FM LIN / EXP (toggle)
• TUNE (large central knob)
• MOD/SAW/PWM (toggle)

Main Controls Row 1

Below the TUNE knob:

• PULSE WIDTH (knob)
• OCTAVE (7-position detented knob) with range from -3 to 3, where 0 is at 12:00

Main Controls Row 2

Below Row 1:

• FM/PWM CV
• SAW SHAPE

Upper Jack Row — Inputs

Five jacks sit in a row from left to right. These are the CV inputs:

• 1V/OCT
• FM IN
• SAW CV
• PWM CV
• SYNC

Lower Jack Row — Waveform Outputs

At the very bottom of the panel, another row of five jacks runs from left to right. These are the waveform outputs:

• SINE
• TRI
• SAW
• PULSE
• SUB