#Black Multimode VCF

Orientation

Orient the module so that the single large CUTOFF knob is at the top center of the panel, and the row of four output/input jacks should be at the bottom.

Layout Overview

The panel is roughly symmetrical left-to-right. A single large knob (CUTOFF) dominates the top. Below it, three rows step down the panel: a pair of CV input jacks, a pair of large knobs (level/resonance), and another pair of CV-attenuator knobs. The bottom of the panel has a horizontal row of four jacks for input and the three filter outputs.

Top Section — Main Cutoff

At the top of the panel:

• CUTOFF (knob); this is the largest knob on the module.

CV Input Jacks Row

Just below the cutoff knob, two jacks sit side-by-side, one on each edge of the panel:

• C-OFF CV
• RESO CV

Main Controls

Below the CV input jacks:

• IN/DRIVE LVL (knob)
• RESONANCE (knob)

Row 2

Below the drive/resonance row, a second pair of knobs:

• C-OFF CV (knob)
• RESO CV (knob)

Bottom Jack Row

At the very bottom of the panel, four jacks are arranged in a single row from left to right:

• INPUT — audio input jack (far left).
• LP OUT — lowpass filter output.
• BP OUT — bandpass filter output.
• HP OUT — highpass filter output (far right).